GiLLROiD Boots Tail Length:
 Boots Tail 15.7cm　Weight:2.6oz class
Flat Tail 14.0cm
Equipped with boots tail
which enables IS-type changeable high speed retrieve

New mechanism installed IS-type,
Gill Shape Super Real bait

This bait was developed by technology gotten through ANDROID and AYUROID.
We make Blue Gill bait in super real which pattern must be one of fishing strategy now.

This bait is compact in about 5.5inch long, but thick wide body which enable high cast-ability even in against wind, and its real shape attracts bass.




How to


Boots tail which newly adopted to this Gill Type bait works well for slow-straight retrieve for searching wide range and perfectly for IS changeable high speed retrieve too.

As to IS changeable speed retrieve, the bait swim in I-style action at super slow speed and change to sharp S-style motion at full acceleration. And during these
I and S-style action, if you stop retrieving, the bait makes quick dart action
which attract big bass.

Enclosed flat tail enable very sharp turn action which works well for timbers and structures.

Boots tail is good for retrieving wide range. Flat tail is good for pin pint fishing.

Two kinds of tail which is completely different characteristic are included in GillRoid.




Detail
  • クイックチェンジャーハンガーシステム(PAT.P)
  • ジョイント・ショックダンパー(PAT.P)
  • テールは着脱可能です。ボックスで保管する際はテールにクセがつかないように外しておくことをオススメします。テールには挿入方向が矢印で表示してありますので、スムーズに取り付け可能です。 ※ 画像は分かりやすくする為に着色しています。
QUICK CHANGER HUNGER
SYSYTEM (PAT.P)
By putting sinker at the hunger,
you can adjust swimming depth,
speed, weight, etc as you want.
And you can fish in any situation.
JOINTED SHOCK DAMPER (PAT.P)
Damper is equipped at the bottom
of jointed part.
The damper is detachable by
join-pin. And you can change to other pin in hardness.
So, you can make any actions in
I-swimming or S-swimming.
Tail is detachable. We recommend to remove when you put it into tackle box. Insert direction is shown by arrow.
*As to boots tail, please fix it by pins or sticks.



Boots Tail mounting method
  • 1. Get a tail wet and insert half.
  • 2. Pull up the tail while pushing the bottom up.
  • 3. Move the tail up and down slightly to stay it in correct position.
  • 3. Move the tail up and down slightly to stay it in correct position.
1. Get a tail wet and insert half.
2. Pull up the tail while pushing
the bottom up.
3. Move the tail up and down slightly to stay it in correct position.
  • 4. Check the position.
  • 4. Check the position.
  • 5. Insert pins or sticks into holes and cut excess of it. ( In picture, toothpicks are used. )
  • 5. Insert pins or sticks into holes and cut excess of it. ( In picture, toothpicks are used. )
4. Check the position.
5. Insert pins or sticks into holes and cut excess of it.
( In picture, toothpicks are used. )
  • 6. Finish !
6. Finish !


Color Chart　(3D Realism)
  • GiLLROiD Boots Tail #548 3D ♀Gill
  • GiLLROiD Boots Tail #587 3D Tilapia
  • GiLLROiD Boots Tail #588 3D Piranha Natteri
#548 3D ♀Gill
#587 3D Tilapia
#588 3D Piranha Natteri
  • GiLLROiD Boots Tail #589 3D Flash Reservoir GiLL
  • GiLLROiD Boots Tail #590 3D Flash BIWAKO Gill
  • GiLLROiD Boots Tail #595 3D Flash ♀Gill
#589 3D Flash Reservoir GiLL
#590 3D Flash BIWAKO Gill
#595 3D Flash ♀Gill
  • GiLLROiD Boots Tail #596 3D Flash Tilapia
  • GiLLROiD Boots Tail #597 3D Reservoir GiLL
  • GiLLROiD Boots Tail #598 3D BIWAKO Gill
#596 3D Flash Tilapia
#597 3D Reservoir GiLL
#598 3D BIWAKO Gill
  • GiLLROiD Boots Tail #599 3D Hiviz' ♀Gill
  • GiLLROiD Boots Tail #600 3D Hiviz' Reservoir GiLL
  • GiLLROiD Boots Tail #601 3D Hiviz' BIWAKO Gill
#599 3D Hiviz' ♀Gill
#600 3D Hiviz' Reservoir GiLL
#601 3D Hiviz' BIWAKO Gill
  • GiLLROiD Boots Tail #602 3D Chart ♀Gill
  • GiLLROiD Boots Tail #603 3D Chart Reservoir GiLL
  • GiLLROiD Boots Tail #604 3D Longear Sunfish
#602 3D Chart ♀Gill
#603 3D Chart Reservoir GiLL
#604 3D Longear Sunfish
  • GiLLROiD Boots Tail #605 3D Flash Pumpkin Seed
  • GiLLROiD Boots Tail #606 3D Yellow Belly Piranha
#605 3D Flash Pumpkin Seed
#606 3D Yellow Belly Piranha

 

 



NOTES
●To avoid any deformation, please refrain storing you’re fishing lures from other soft plastic lures.
●Do not hit your lure on the ground or any to take out some of the weeds or other remains from the fields

when you might damage or give serious crack on the lure.
●We’re extra careful to deliver our products in its effective setups as IMAKATSU Brand.
However, if retrieving is not in straight, please tune up the eye positions of your lure.



●Please be extra careful in sharp hook or items within this product.
●Keep out of reach of children.
●Do not use the lure for any other purpose or use.
●Please be careful while you're using the lure.
●Please do not pull your rod if your lure is hooked to any object.

 

 

TOP OF THIS PAGE